Liquid and Paste Fluxes

AIM’s Liquid Fluxes and Paste Fluxes are available in a variety of formulations and packaging. The no clean, water soluble and rosin based chemistries of AIM’s fluxes offer a broad range of benefits proven to perform well in a variety of applications.

 FX16 No Clean Flux has been engineered to provide exceptional soldering performance while leaving minimal, electrically safe flux residues, even when unheated. FX16 is ideally formulated for point-to-point selective soldering and palletized wave soldering. FX16 provides...
  NC280 is a low-to-medium solids, no-clean liquid flux formulated to leave minimal post-process residues that are pin testable without cleaning.  NC280 offers an excellent activity level with good performance on bare copper, solder coated and organic coated PWBs, leaving...
 NC217 Gel Flux is designed for touch-up and repair work where the flux may spread away from the heat source.  NC217 Gel Flux is electrically safe even without a thermal profile.  This gel flux dries within one hour of use with or without heat and is tack-free after four hours.
 RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning. As a mildly activated rosin based flux, RMA 202-25 offers a wide process...
 WS715M is a neutral alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. Though designed for application via foam fluxer, WS715M may also be applied by automated flux sprayers, dipped, or brushed on with favorable...
  WS716 is a halogen- and halide-free, alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. WS716 is the liquid version of the WS-477S1 series solder paste. Though designed for application via foam fluxer, WS716...
 WS770 is a PH neutral, organically activated, water-based, VOC-free water-soluble liquid flux formulated to fully atomize during the wave soldering process. WS770 may be applied by automated flux sprayers, foamed, dipped, or brushed on with favorable results. WS770 is a buffered...
 NC Paste Flux is a no clean tacky/rework flux designed to wet virtually all solderable electronic surfaces, components, assemblies, and substrates. AIM NC Paste Flux may be used for general touch up or rework of printed circuit boards, and for attaching spheres to ball grid array (BGA)...